O. Faruk, A. K. Bledzki, and H. P. Fink, Biocomposites reinforced with natural fibers, Prog Polym Sci, vol.37, pp.1552-1596, 2000.

K. G. Satyanarayana, G. Arizaga, and F. Wypych, Biodegradable composites based on lignocellulosic fibers -An overview, Prog Polym Sci, vol.34, pp.982-1021, 2009.

L. Yan, N. Chouw, and K. Jayaraman, Flax fibre and its composites -A review, Compos Part B: Eng, vol.56, pp.296-317, 2014.

L. Yan and L. Huang, A review of recent research on the use of cellulosic fibres, their fibre fabric reinforced cementitious, geo polymer and polymer composites in civil engineering, Compos Part B: Eng, vol.92, pp.94-132, 2016.

L. Pil, F. Bensadoun, and J. Pariset, Why are designers fascinated by flax and hemp fibre composites ?, Compos Part A: Appl Sci Manuf, vol.83, pp.193-205, 2016.

P. Wambua, J. Ivens, and I. Verpoest, Natural fibres : can they replace glass in fibre reinforced plastics ?, Compos Sci Technol, vol.63, pp.1259-1264, 2003.

A. Mancuso, G. Pitarresi, and D. Tumino, Mechanical behaviour of a green sandwich made of flax reinforced polymer facings and cork core, Procedia Eng, vol.109, pp.144-153, 2015.

O. Castro, J. M. Silva, and T. Devezas, Cork agglomerates as an ideal core material in lightweight structures, Mater Des, vol.31, pp.425-432, 2010.

I. Alca?ntara, F. Teixeira-dias, and M. Paulino, Cork composites for the absorption of impact energy, Compos Struct, vol.95, pp.16-27, 2013.

A. Fathi, F. Wolff-fabris, and V. Altstadt, An investigation on the flexural properties of balsa and polymer foam core sandwich structures: Influence of core type and contour finishing options, J Sandw Struct Mater, vol.15, pp.487-508, 2013.

J. L. Grenestedt and B. Bekisli, Analyses and preliminary tests of a balsa sandwich core with improved shear properties, Int J Mech Sci, vol.45, pp.1327-1346, 2003.

M. Osei-antwi, D. Castro, J. Vassilopoulos, and A. P. , Shear mechanical characterization of balsa wood as core material of composite sandwich panels, Constr Build Mater, vol.41, pp.231-238, 2013.

S. V. Teles and D. E. Chimenti, Closed disbond detection in marine glass-epoxy/balsa composites, NDT&E Int, vol.41, pp.129-136, 2008.

L. Duigou, A. Deux, J. Davies, and P. , PLLA flax mat balsa bio sandwich. Manufacture and mechanical properties, Appl Compos Mater, vol.18, pp.421-438, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00718779

Y. Karaduman and L. Onal, Flexural behavior of commingled jute/polypropylene nonwoven fabric reinforced sandwich composites, Compos Part B: Eng, vol.93, pp.12-25, 2016.

E. Kandare, P. Luangtriratana, and B. K. Kandola, Fire reaction properties of flax epoxy laminates and their balsa core sandwich composites with or without fire protection, Compos Part B: Eng, vol.56, pp.602-610, 2014.

J. J. Sargianis, H. Kim, and A. E. , Sound and vibration damping characteristics in natural material based sandwich composites, Compos Struct, vol.96, pp.538-544, 2013.

A. Monti, A. El-mahi, and Z. Jendli, Experimental and finite elements analysis of the vibration behaviour of a bio-based composite sandwich beam, Compos Part B: Eng, vol.110, pp.466-475, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01792070

M. Khalfallah, A. `. , B. , A. `. , and F. , Innovative flax tapes reinforced Acrodur biocomposites: A new alternative for automotive applications, Mater Des, vol.64, pp.116-126, 2014.

R. Boumbimba, M. Coulibaly, and M. Khabouchi, Glass fibres reinforced acrylic thermoplastic resin-based tri-block copolymers composites : Low velocity impact response at various temperatures, Compos Struct, vol.160, pp.939-951, 2017.

M. Borrega and L. J. Gibson, Mechanics of balsa (Ochroma pyramidale) wood, Mech Mater, vol.84, pp.75-90, 2015.

D. Silva, A. Kyriakides, and S. , Compressive response and failure of balsa wood, Int J Solids Struct, vol.44, pp.8685-8717, 2007.

G. Vural-m-and-ravichandran, Dynamic response and energy dissipation characteristics of balsa wood : Experiment and analysis, Int J Solids Struct, vol.40, pp.2147-2170, 2003.

P. D. Soden and D. Mcleish, Variables affecting the strength of balsa wood, J Strain Anal, vol.11, pp.225-234, 2015.

, Standard test method for flatwise tensile strength of sandwich constructions, ASTM C297/C297M-04, 2004.

, Standard test method for facing properties of sandwich constructions by long beam flexure, ASTM D7249/D7249M -06, 2006.

, Standard test method for core shear properties of sandwich constructions by beam flexure, ASTM C393/C393M -16, 2016.

S. Liang, P. Gning, and L. Guillaumat, Properties evolution of flax epoxy composites under fatigue loading, Int J Fatigue, vol.63, pp.36-45, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01067057

A. B. Haskell, A durability and utility analysis of EFPI optic strain sensors embedded in composite materials for structural health monitoring. Electronic Theses and Dissertations, 2004.

T. Hou, J. M. Baughman, and T. J. Zimmerman, Evaluation of sandwich structure bonding in out-of-autoclave processing, SAMPE J, p.47, 2010.

H. Tuwair, M. Hopkins, and J. Volz, Evaluation of sandwich panels with various polyurethane foam cores and ribs, Compos Part B: Eng, vol.79, pp.262-276, 2015.

J. R. Correia, M. Garrido, and J. A. Gonilha, GFRP sandwich panels with PU foams and PP honeycomb cores for civil engineering structural applications, Int J Struct Integrity, vol.3, pp.127-147, 2012.

T. Sok, Effects of angled stitch reinforcement on foam core sandwich structures, 2012.

A. Monti, A. El-mahi, and Z. Jendli, Mechanical behaviour and damage mechanisms analysis of a flax-fibre reinforced composite by acoustic emission, Compos Part A: Appl Sci Manuf, vol.90, pp.100-110, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01792109

, Standard test method for shear properties of sandwich core materials, ASTM C273/C273M -16, 2016.

T. C. Triantafillou and L. J. Gibson, Failure mode maps for foam core sandwich beams, Mater Sci Eng, vol.95, pp.37-53, 1987.

E. W. Andrews and N. A. Moussa, Failure mode maps for composite sandwich panels subjected to air blast loading, Int J Impact Eng, vol.36, pp.418-425, 2009.

J. Pablofrancucci, G. J. Xiong, and A. Stocchi, Failure mode maps of natural and synthetic fiber reinforced composite sandwich panels, Compos Part A: Appl Sci Manuf, vol.94, pp.217-225, 2017.

D. Zenkert, The handbook of sandwich construction, 1997.

W. Boukharouba, A. Bezazi, and F. Scarpa, Identification and prediction of cyclic fatigue behaviour in sandwich panels, Measurement, vol.53, pp.161-170, 2014.

I. Ben-ammar, C. Karra, E. Mahi, and A. , Mechanical behavior and acoustic emission technique for detecting damage in sandwich structures, Appl Acoust, vol.86, pp.106-117, 2014.

M. Assarar, Etude expe´rimentale et mode´lisation du comportement dynamique des composites stratifie´s et sandwichs. Thesis, 2007.

A. El-mahi, M. K. Farooq, and S. Sahraoui, Modelling the flexural behaviour of sandwich composite materials under cyclic loading, Mater Des, vol.25, pp.199-208, 2004.

M. Ganapathi, B. P. Patel, and P. Boisse, Flexural loss factors of sandwich and laminated composite beams using linear and nonlinear dynamic analysis, Compos Part B: Eng, vol.30, pp.245-256, 1999.
URL : https://hal.archives-ouvertes.fr/hal-01366944

M. Idriss, A. El-mahi, and M. Assarar, Damping analysis in cyclic fatigue loading of sandwich beams with debonding, Compos Part B: Eng, vol.44, pp.597-603, 2013.