J. Summerscales, A. Virk, and W. Hall, A review of bast fibres and their composites: part 3 e modelling, Compos Part A, vol.44, pp.132-141, 2013.

K. Farooq, Comportement m ecanique des composites sandwichs en statique et en fatigue cyclique, 2003.

L. Yan, B. Kasal, and L. Huang, A review of recent research on the use of cellulosic fibres, their fibre fabric reinforced cementitious, geo polymer and polymer composites in civil engineering, Compos Part B, vol.92, pp.94-132, 2016.

Y. Li, Y. Mai, and L. Ye, Sisal fibre and its composites: a review of recent developments, Compos Sci Technol, vol.60, 2000.

J. Zhu, H. Zhu, J. Njuguna, and H. Abhyankar, Recent development of flax fibres and their reinforced composites based on different polymeric matrices, Mater (Basel), vol.6, pp.5171-98, 2013.

L. Pil, F. Bensadoun, J. Pariset, and I. Verpoest, Why are designers fascinated by flax and hemp fibre composites?, Compos Part A, vol.83, pp.193-205, 2016.

P. Wambua, J. Ivens, and I. Verpoest, Natural fibres: can they replace glass in fibre reinforced plastics?, Compos Sci Technol, vol.63, pp.1259-64, 2003.

B. Baghaei, M. Skrifvars, and L. Berglin, Manufacture and characterisation of thermoplastic composites made from PLA/hemp co-wrapped hybrid yarn prepregs, Compos Part A, vol.50, pp.93-101, 2013.

A. Bourmaud, G. Ausias, G. Lebrun, M. Tachon, and C. Baley, Observation of the structure of a composite polypropylene/flax and damage mechanisms under stress, Ind Crop Prod, vol.43, pp.225-261, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00985158

P. A. De-arcaya and A. Arbelaiz, Mechanical properties of natural fibers/polyamides composites, Polym Compos, pp.254-64, 2009.

H. L. Bos, J. Müssig, and M. Van-den-oever, Mechanical properties of short flax fibre reinforced compounds, Compos Part A, vol.37, issue.10, pp.1591-604, 2006.

K. G. Satyanarayana, G. Arizaga, and F. Wypych, Biodegradable composites based on lignocellulosic fibers -an overview, Prog Polym Sci, vol.34, pp.982-1021, 2009.

B. Tomas, Manufacturing and applications structural sandwich components of, Compos Part A, vol.28, pp.97-111, 1997.

H. Ning, G. M. Janowski, U. K. Vaidya, and G. Husman, Thermoplastic sandwich structure design and manufacturing for the body panel of mass transit vehicle, Compos Struct, vol.80, pp.82-91, 2007.

L. Duigou, A. Deux, J. Davies, P. Baley, and C. , PLLA flax mat balsa bio sandwich. Manufacture and mechanical properties, Appl Compos Mat, vol.18, pp.421-459, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00718779

L. Duigou, A. Deux, J. Davies, P. Baley, and C. , PLLA flax mat balsa bio sandwich environmental impact and simplified life cycle analysis, Appl Compos Mat, vol.19, pp.363-78, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00718775

B. Bekisli and J. L. Grenestedt, Experimental evaluation of a balsa sandwich core with improved shear properties, Compos Sci Technol, vol.64, pp.667-74, 2004.

J. L. Grenestedt and B. Bekisli, Analyses and preliminary tests of a balsa sandwich core with improved shear properties, Int J Mech Sci, vol.45, pp.1327-1373, 2003.

C. Atas and C. Sevim, On the impact response of sandwich composites with cores of balsa wood and PVC foam, Compos Struct, vol.93, issue.1, pp.40-48, 2010.

E. Kandare, P. Luangtriratana, and B. K. Kandola, Fire reaction properties of flax epoxy laminates and their balsa core sandwich composites with or without fire protection, Compos Part B, vol.56, pp.602-612, 2014.

S. Prabhakaran, V. Krishnaraj, M. Senthil, and R. Zitoune, Sound and vibration damping properties of flax fiber reinforced composites, Procedia Eng, vol.97, pp.573-81, 2014.
URL : https://hal.archives-ouvertes.fr/hal-02054330

M. Le-guen, R. H. Newman, A. Fernyhough, and M. P. Staiger, Tailoring the vibration damping behaviour of flax fibre-reinforced epoxy composite laminates via polyol additions, Compos Part A, vol.67, pp.37-43, 2014.

F. Duc, P. E. Bourban, C. Plummer, and J. E. Mnson, Damping of thermoset and thermoplastic flax fibre composites, Compos Part A, vol.64, pp.115-138, 2014.

M. Assarar, W. Zouari, H. Sabhi, R. Ayad, and J. Berthelot, Evaluation of the damping of hybrid carbon flax reinforced composites, Compos Struct, vol.132, pp.148-54, 2015.

J. J. Sargianis, H. Kim, A. E. Suhr, and J. , Sound and vibration damping Fig. 11. Fraction of dissipated energy by the core and skins. Parametrical analysis on the influence of the core thickness. characteristics in natural material based sandwich composites, Compos Struct, vol.96, pp.538-582, 2013.

M. Khalfallah, B. Abb-es, A. , F. Guo, Y. Q. Marcel et al., Innovative flax tapes reinforced acrodur biocomposites: a new alternative for automotive applications, Mat. Des, vol.64, pp.116-142, 2014.

C. Baley, L. Duigou, A. Bourmaud, A. Davies, and P. , Influence of drying on the mechanical behaviour of flax fibres and their unidirectional composites, Compos Part A Appl Sci Manuf, vol.43, issue.8, pp.1226-1259, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00717191

A. Monti, A. El-mahi, Z. Jendli, and L. Guillaumat, Mechanical behaviour and damage mechanisms analysis of a flax-fibre reinforced composite by acoustic emission, Compos Part A, vol.90, pp.100-110, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01792109

, ASTM E756e98;: Standard Test Method for Measuring Vibration Damping Properties of Materials

D. Silva and C. W. , Vibration: fundamentals and practice, 2006.

J. M. Berthelot, Composite materials, 1997.

D. Ross, E. E. Ungar, and E. M. Kerwin, Damping of plate flexural vibration by means of viscoelastic laminates, ASME Struct Damping, pp.49-88, 1959.

R. D. Adams, M. Fox, R. Flood, R. J. Friend, and R. L. Hewitt, The dynamic properties of unidirectional in torsion and flexure carbon and glass fiber reinforced plastics, J Compos, vol.3, pp.594-603, 1969.

R. D. Adams and D. Bacon, Measurement of the flexural damping capacity and dynamic young ' s modulus of metals and reinforced plastics, J Phys D Appl Phys, vol.6, pp.27-41, 1973.

M. Assarar, A. E. Mahi, and J. Berthelot, Damping Analysis of Sandwich Composite Materials, J. Compos. Mater, vol.43, issue.13, p.209

J. Berthelot, M. Assarar, Y. Sefrani, and A. El, Damping analysis of composite materials and structures, Compos Struct, vol.85, pp.189-204, 2008.

R. Rikards, A. Chate, and E. Barkanov, Finite element analysis of damping the vibrations of laminated composites, Comput Struct, vol.47, issue.6, pp.1005-1020, 1993.

E. Barkanov and A. Chate, Damping analysis of sandwich strctures, Trans Eng Sci, vol.4, pp.415-437, 1994.

R. Baretta and R. Luciano, Exact solutions of isotropic viscoelastic functionally graded Kirchoff plates, Compos. Struct, vol.118, p.14

A. Apuzzo, R. Barretta, and R. Luciano, Some analytical solutions of functionally graded Kirchoff plates, Compos Part B, vol.68, pp.266-275, 2015.

R. Baretta and R. Luciano, Anaogies between Kirchoff plates and functionally graded Saint-Venant beams under torsion, Contin Mech Thermodyn, vol.27, pp.499-505, 2015.

P. D. Soden and D. Mcleish, Variables affecting the strength of balsa wood, J Strain Anal, vol.11, issue.4, pp.225-259, 2015.

, Wood handbook: wood as an engineering material, Agriculture, p.72, 2010.

C. Lanczos, An iteration method for the solution of the eigenvalue problem of linear differential and integral operators, J Res Natl Bur Stand, vol.45, pp.255-82, 1950.
URL : https://hal.archives-ouvertes.fr/hal-01712947

M. Assarar, A. El-mahi, and J. M. Berthelot, Evaluation of the dynamic properties of PVC foams under flexural vibrations, Compos Struct, vol.94, issue.6, pp.1919-1950, 2012.

K. M. Gorreparti and M. D. Rao, Analysis of adhesively bonded double-strip joints by the modal strain energy method, J Vibr Acoust, vol.118, pp.28-35, 1996.

F. P. Landi, F. Scarpa, J. A. Rongong, and G. Tomlinson, Improving the modal strain energy method for damped structures using a dyadic matrix perturbation, J Mech Eng Sci Proc Instn Mech Engrs, pp.1207-1223, 2002.

P. J. Torvik and B. Runyon, Modifications to the method of modal strain energy for improved estimates of loss factors for damped structures, Shock Vib, vol.14, pp.339-53, 2007.